Four parts explain most toilet trouble: a rubber flapper, a fill valve, a lift chain and the wax ring at the bowl's base. A plumber can pin down which one in minutes and normally repairs it on that trip. Live in San Bernardino, Highland, Redlands or nearby? We arrange the visit, and you receive the price on paper beforehand. Visit the home page, or write up the problem on our quote form.
What goes wrong with toilets most often?
What you see tells you what broke. Inside a standard tank, the flapper, fill valve and chain cause most failures, and the table below pairs each common symptom with its likely cause and with the person who normally handles the work, you or a plumber.
| Symptom | Probable cause | Handled by |
|---|---|---|
| Hiss from the tank, or refilling on its own | Flapper leaking, or float riding too high | Usually you |
| Handle moves but nothing lifts | Chain off its hook or broken | You |
| Puddle spreading from under the bowl | Failed wax ring or slack closet bolts | A plumber |
| Dripping from beneath the tank | Tank bolt washers gone stiff | You or a plumber |
| Damp spot by the wall | Supply line or valve weeping | Typically a plumber |
| Flush with little force, clogged rim jets | Mineral scale inside the rim | A plumber if descaling fails |
A tank that runs nonstop has its own walkthrough: the page on endless running. If the flush is weak, the toilet flush repair article is the one to open.
Which toilet repairs can a homeowner do?
A flapper, a chain or a float adjustment is realistic for most people: ten minutes, a bucket and a sponge. Close the shutoff at the wall, flush, and look at what moves. A plumber handles the wax ring below the bowl and any stubborn valve.
A sensible order:
- Raise the lid, press the handle and look inside. Watch the chain: it should raise the flapper all the way, then let it fall flat.
- Stir a few drops of dye into the tank, then wait fifteen minutes with no flushing. A colored bowl means the flapper is not sealing.
- Check the water height against the overflow tube. If it spills over into that tube, bend the float arm or drop the float so that the surface ends up an inch lower.
- The chain wants a little looseness, about half an inch.
Detailed part swaps are covered in the guides on replacing a flapper and replacing a fill valve. Fit matters: a Kohler toilet, for example, can take a different flush valve size than a universal kit. The model name is stamped inside the tank. Match the new flapper against the worn one at the store.
Give up the project if the valve at the wall is stuck or drips at its stem, if the tank is cracked, or if the bowl shifts under you. Forcing a crusty valve is how ten minutes becomes a flooded hallway.
What should a toilet repair cost around San Bernardino?
Across the country, This Old House gives $100 to $300 for toilet repair. For San Bernardino or Redlands specifically, we found no published price list. Your written quote decides the real number, as it adds labor time, the part and any trip charge.
The same guide puts hourly plumbing at $25 to $200: $50 to $100 for journeymen, $75 to $200 for masters. Flappers and fill valves take under an hour, which keeps them cheap. Lifting the bowl for a fresh wax ring takes longer and costs more.
Factors that push the price up:
- Cramped access, such as a toilet wedged against a tub, adds time.
- A corroded shutoff valve gets its own line on the bill.
- Scale from hard water. San Bernardino Municipal Water Department's 2024 report shows average hardness at 242.67 mg/L, from a low of 120 to a high of 330. The City of Redlands reported 148 mg/L (groundwater) and 117 mg/L (surface water) in its 2026 report. Mineral crust forms on fill valve parts and on the seat the flapper sits against, and eventually they stick. The supplier appears on your bill, and each supplier's figure applies only to its customers.
- Parts: branded flush valves cost more than generic kits.
Ask the plumber to list parts and labor apart.
Is replacing the toilet better than repairing it?
A single failed part in an otherwise sound toilet is worth fixing. A cracked porcelain bowl or tank, weekly clogs, or one repair after another point to buying new. Bob Vila lists installation at $224 to $532, with a national average of $372.
An old toilet can use more water with every flush than a current model, and a replacement also cures a rocking base. When one repair estimate climbs toward the price of a new toilet, ask for both prices on the same visit. Details on that range are on the page about toilet replacement prices. Sealant will not hold across a hairline crack, so a cracked tank or bowl always means replacement.
Whose job is a leaking toilet?
The base, the supply line and the wall valve are for a plumber. Tank bolts you can handle. Find the source by drying everything, tissue-wrapping each joint, and seeing which strip darkens first. A longer, step-by-step guide on toilet leak causes and who should fix them is available.
- Tank bolts seeping: new rubber washers.
- Supply line wet at the nut: tighten lightly, or put in a new braided line.
- Base wet: the wax seal has failed, and the subfloor may be soaked.
- Tank beaded with moisture: humidity, nothing broken.
Slow drips add up: the EPA estimates over 9,300 gallons a year wasted in a leaking household. A blocked bowl is a separate problem, covered on the pages for clogged toilet help and what unclogging costs, where Fixr shows $200 to $700 nationally. If the shower or sink gurgles too, suspect the main line and not the toilet.
What do plumbers call a toilet, and who earns the most?
Plumbers say water closet. In a cistern toilet the usual failures are a flapper that lets water by, a worn inlet valve, or a handle arm and chain that have worked loose. Masters earn the most: This Old House shows $75 to $200 an hour for them and $50 to $100 for journeymen.
Local hourly rates were not published anywhere we looked, so the quote is what counts. The Contractors State License Board enters the picture in California at $1,000 in combined labor and materials, and always when a permit is involved. Everyday toilet repairs come in well under that, with no permit.
How do I avoid overpaying for a toilet repair?
Cheap ought to describe the final bill. A tiny trip fee that grows after someone steps into your bathroom is not cheap. Get two written quotes that split out part, labor and trip charge, and compare them line by line before you accept either one.
A handyman can change a flapper. A leaking base, a stuck shutoff or anything near the drain calls for a plumber. We cover San Bernardino, Highland, Redlands and Yucaipa, as the service areas page shows. Ask for a visit and read the price before agreeing.
Common questions
What should I expect for timing?
A flapper, chain or fill valve swap runs under an hour from arrival, if the shutoff valve cooperates. A wax seal needs the bowl lifted and reset, so allow longer. A full toilet replacement is the biggest job. A time estimate is part of the written quote.
What does removing an old toilet and installing a new one cost?
Installing a toilet runs $224 to $532 per Bob Vila, with a $372 average, while This Old House gives $300 to $800. Both are national guides rather than local prices. Disposal of the old toilet is often folded in, so read that line. The number for your bathroom is the one in the written quote.
Can I step out during the job?
Have an adult present at the start to point out the toilet, its valve, and to okay the job. Supervising every minute is not required. Mention pets, gate codes and parking when you book, and move things away from the back of the bowl.
What do I confirm first when I get a quote?
See that it is itemized, learn what the trip charge covers, ask if parts are new, and find out how the total changes when the wall valve must be replaced. Contractor licensing applies in California to $1,000 jobs and permitted work, so ask to see the license.
Guides in this section
- Plumber for Toilet Leak (San
Water around a toilet in San Bernardino or Redlands?
- How to Repair a Toilet Fill
Toilet hissing, refilling on its own or running up the water bill?
- Toilet Flapper Repair
A running toilet is usually a worn flapper.
- Plumber Toilet Replacement Cost
Typical prices for a plumber to replace a toilet in San Bernardino and Redlands, the extras that raise the total, and the items a good…
- Toilet Flush Repair
Weak flush, handle that sticks, or a toilet running on after the flush?
- Toilet Keeps Running
A toilet that keeps running is usually a worn flapper or a stuck fill valve.
References
- This Old House, plumber cost guide (toilet repair $100-$300, hourly rates), checked 2026-11-17
- Fixr, cost to unclog a toilet, checked 2026-11-17
- Bob Vila, toilet installation cost, checked 2026-11-17
- EPA WaterSense, Fix a Leak Week
- San Bernardino Municipal Water Department, 2024 water quality report
- City of Redlands, 2026 water quality report
- California Contractors State License Board