Skip to the page
Call us (909) 768-7747

Guide ยท San Bernardino

Backflow prevention testing in San Bernardino and Redlands

A backflow assembly keeps drinking water clean when pressure drops or an irrigation line goes wrong. What a test involves, who may perform it and how to learn your supplier rules are covered here.

Backflow assembly on a supply pipe: two check valves, a relief valve between them, and test cocks.

A brief field test shows whether the devices protecting drinking water still block used, irrigation or fire sprinkler water from seeping back in. The interval is your water supplier's call, and the State Water Board's handbook expects yearly testing for assemblies. This topic belongs to the permits, codes and inspections group; for anything else, see the home page.

What does the tester read off the assembly?

Using a gauge kit attached to the small test cocks, the tester measures two things: do the check valves resist reverse flow, and does the relief valve open when it must. Together the numbers show whether water could move the wrong way. The supplier receives a written report. A failure means repair or replacement, followed by a fresh test.

You will find these devices on lawn sprinkler lines, fire sprinkler feeds, pools and ponds, boilers and commercial equipment. A typical house most often has an irrigation assembly close to the building or near the meter. If you cannot name yours, a plumber can identify it, which is itself a useful first inspection.

Which devices need yearly testing is the supplier's decision, and residential and commercial rules may differ. So ask before anything else.

Why call a plumber for this?

Three situations: a failed test that leaves the assembly needing work, a device you cannot identify, or one buried or standing in water. Taking out and replacing an assembly counts as plumbing. State law bars anyone without a California contractor license from taking work that reaches $1,000 or needs a permit.

On the same visit, the plumber can inspect the shutoff valves near the assembly, a leaking irrigation riser or a regulator upstream. The gas, permit and code page explains how permits work in the cities and county around San Bernardino. Larger assemblies at businesses are covered under commercial backflow testing.

No price for a backflow test was verified, so this page states none. The number on your own quote is the only one that counts. Ask for it on the quote page.

Is a mobile home plumbing inspection the same thing?

The plumber looks over supply lines, drains and fixtures, many of which run beneath the floor where leaks can stay hidden for months. The plumber reads water pressure, tries the shutoff valves, looks at the water heater hookups and checks underfloor access for damp insulation or stains. That is a general plumbing check, not a backflow test, although a backflow device can be noted on the same visit.

Suspect a drain problem? A camera run through the sewer line shows the pipe from inside. This Old House lists camera inspections at $100 to $500 nationally, which is only a guide, since your written quote decides the price. Park rules may assign pipes before and after the meter to different parties, so ask the park office first.

How can I learn what my own address requires?

Call the water supplier. Ask whether an assembly is recorded against your address, whether a test is coming due, and whether the supplier maintains a roster of approved testers. The utility serving you can differ block by block, so read your bill first. Then book the test and save the report.

Decision steps: call the supplier, check for a recorded assembly and due test, then hire a credentialed tester.

Numbers each supplier publishes, with the labels they use:

  • San Bernardino Municipal Water Department: Water Quality (909) 453-6190, listed as the cross-connection contact in its 2024 report.
  • East Valley Water District, serving Highland: Water Quality (909) 806-4222.
  • City of Redlands: Customer Service (909) 798-7516.
  • Yucaipa Valley Water District: (909) 797-5117.

Muscoy gets water from a mutual water company rather than the city, and other suppliers may serve edge addresses in Del Rosa, Mentone and Oak Glen, which makes your bill the most reliable answer. The local areas pages mention this wherever the facts are confirmed.

Who may perform the test, and is an online course enough?

The State Water Board publishes a Cross-Connection Control Policy Handbook, and under it field testers must hold a credential from an organization the Board recognizes, and public water systems must confirm that testers have one. Credentials come from a training course plus an exam. Some courses are offered online, but whether one counts depends on its issuer being recognized, so verify before paying.

People who search for online backflow certification are mostly testers hunting for a course. A homeowner wants the reverse: somebody who already holds the credential. Request the credential number and check with your supplier that it accepts this tester. Some suppliers maintain an approved list.

The handbook superseded older state regulations, yet many web pages still describe the old rules. If a page cites an old section number, cross-check with the supplier or the State Water Board.

Common questions

Will the test drag on?

No. With access and the right valves closed, one assembly takes only minutes, and water to the irrigation line or building is off meanwhile. Repairs, parts or an assembly that is hard to locate stretch things out, so have the plumber name a rough duration first.

Which things should I raise with a tester first?

Get the credential number and confirm that your supplier accepts it. Learn what is included, who delivers the report to the supplier, and what repair would cost if the assembly fails. Keep the answers written. A contractor license number, if one is given, can be verified on the state's CSLB website.

Does anyone have to be on site?

Yes, you or a trusted adult. Someone has to unlock the yard gate or meter box, and hearing the result firsthand helps. Part of the property loses water for a while. If the assembly is behind a lock, arrange access beforehand. Any repair gets explained on the spot.

Is a yearly test required for my house?

Only when your supplier says a device on your property must be tested. The California handbook calls for annual testing of assemblies in public water systems, but each supplier chooses which customers that covers. Ask the supplier, read the notice it mails you, and keep every report.

References