Skip to the page
Call us (909) 768-7747

About the job · San Bernardino

Gas plumbing and backflow testing, San Bernardino and Redlands

Two plumbing jobs, gas piping and backflow devices, are ruled by regulations far more than by tools. Read on for who performs them, what gets inspected, and how a written quote starts.

Request a quote

Gas line from the meter with a seismic shutoff valve and branches to a range, water heater and dryer.

The smell of gas changes the order of things. Get everyone out first. Once you are standing in the yard or on the sidewalk, dial SoCalGas, 1-800-427-2200. Heavy odor, or no answer, means 911. Scheduled jobs, like a new range line, a dryer outlet or a gas connection for a replacement water heater, are less urgent. Describe the job through the quote page, and we line up a plumber near you.

Below, you will see what the work involves, which permit counter covers your street, and how backflow testing fits alongside. Other services we handle are shown on the home page.

What work does a gas plumber handle?

Think of the pipe that feeds ranges, dryers, furnaces, fireplaces, outdoor grills and water heaters. A gas plumber installs it, extends it, repairs it and proves it tight. Nothing gets lit until the line holds pressure and every fitting has been checked for leaks. A leak means fire risk, which is why rules surround the trade.

Two related pages: gas line plumbing lists everyday jobs, and the earthquake shutoff valve guide covers the device that shuts the line during strong shaking.

SoCalGas names San Bernardino, Del Rosa, Patton, Muscoy, Highland, Redlands, Crafton, Mentone and Yucaipa on its list of served cities. Verdemont, Arrowhead Farms, Arrowhead Springs and Oak Glen have no separate entry. For those addresses, the gas bill tells you who delivers to the house.

Who is legally allowed to work on gas pipes?

In California, gas piping generally calls for a contractor with a license. Jobs worth $1,000 or more once labor and materials are added need one, and so does every permit job, however cheap. Many gas jobs do need a permit; the local building office can tell you about yours.

Treat a cash-only gas job with no paperwork as a warning. The CSLB site lets you search a license number. Contracts over $500 must be written, and the CSLB generally caps deposits at 10 percent or $1,000, whichever is less. Confirm current limits with the CSLB.

Which office issues a plumbing or gas permit for my address?

The answer follows your address. Within San Bernardino city limits, the Building and Safety Division counter at 201 North E Street (909-998-2000) handles it, and a smaller job, like swapping a water heater, can usually be settled right at the counter. Redlands has its own division at 35 Cajon Street, Suite 15A, 909-798-7536.

Highland (909-864-6861 ext. 232) and Yucaipa (909-797-2489) run their own desks. Muscoy, Mentone, Crafton and Oak Glen lie in unincorporated territory, so the county office, Land Use Services, issues permits, and its plumbing page lists water heater and tankless changes among permit projects. To learn which office holds your parcel, ring 909-387-8311.

What does gas pipe work usually cost?

Published guides do not line up. One guide gives $120 to $1,350 for a new gas line, averaging $558 nationally. Another gives $500 to $2,000 with an $800 average. A third prices repair at $250 to $750. Nothing there is local, so the written quote decides what you pay.

Distance, pipe material, a wall or slab that must be opened, the count of appliances on the line and permit fees all raise the price. One guide puts a fireplace at roughly $15 to $25 per linear foot and a stove, dryer or water heater at $20. The gas line cost page walks through each factor.

Why does a backflow test come up, and what does it involve?

Water normally flows one way, into the house. A backflow preventer acts like a turnstile for water: it lets clean water in and keeps dirty water from creeping back into the public main when pressure falls. In the test, a technician connects a gauge and confirms that both check valves and the relief valve seal. A device that fails gets rebuilt or replaced, then tested again.

Backflow preventer cross-section with two check valves, a relief valve and two test cocks for testing.

Irrigation systems, fire sprinklers, commercial buildings and certain boilers and pools carry these devices. Each water supplier decides which ones need testing and on what cycle, so this page gives no schedule. Contact yours: San Bernardino Municipal Water Department, East Valley Water District, City of Redlands or Yucaipa Valley Water District. Business owners should see commercial backflow testing; for a house, begin with backflow prevention testing.

What qualifications should a backflow tester have?

Plenty of suppliers look for a tester who holds a recognized backflow credential, works with a calibrated gauge, and submits a report to the supplier. We have not verified the rule at every local utility. Ask the one serving you whom it will accept, then hire.

The gauge measures the pressure drop across the check valves. A pass means both hold; a fail identifies the leaking part. Keep a copy of the report, because suppliers often set a filing deadline. Often the tester can rebuild the assembly rather than replace it.

Does a camera inspection have a role here?

Not with gas, since cameras travel through drains and sewer lines. They come into play when a plumber is checking a sewer connection or looking over an older house before you buy it. One published guide lists sewer camera inspection at $100 to $500, and plumbing inspection cost says more.

Gas has its own version of that check. When the work wraps up, expect a pressure test and a leak check at every joint, followed by the building department's inspection if a permit was pulled.

Book a plumber quote

Fill this in and we'll arrange a local plumber specialist to come and price the job.

Needed so the business can price the job properly.

We earn a referral fee from the plumber who takes on your job. You pay us nothing.

Common questions

How much time should I set aside for gas work?

Hooking up a single appliance might take just a few hours. Running new pipe to a kitchen or the yard, pressure test included, may occupy a full day, and a pending inspection stretches the calendar further. A time estimate should arrive with the written quote.

What do I ask a gas plumber before agreeing?

Begin with the contractor license number, then check whether permit and inspection are in the price. Ask about the pipe material, the pressure test method, and who repairs an opened wall or floor. Make sure the written quote carries each answer.

Should I be home for gas or backflow work?

With gas, yes. An adult should let the plumber in, follow the work and leave the appliance within reach. Backflow devices usually sit outdoors, so gate or yard access might be enough. Say which situation applies when you submit the request.

Can I run my own gas line?

Owner-work rules and permit requirements vary by city, and we could not confirm them for each, so we advise against it. Call your building division before touching anything. A gas fitting that looks tight can still leak, and the consequences are serious.

Guides in this section

  • Backflow Prevention Testing

    Backflow prevention testing for San Bernardino and Redlands properties: what the test checks, who may do it, how often, and who at your…

  • Plumber Inspection Cost

    What a plumbing inspection, camera inspection or backflow test costs as a national guide, plus who issues plumbing permits in San…

References