Homeowners nationwide pay from $874 up to $1,765 for a typical new tank, and Bob Vila reports an average of $1,293 (checked 2026-11-17). No source we read printed a figure for San Bernardino specifically. Use that span as a loose benchmark, not a prediction.
What fixes the price is the estimate you hold in writing. Ahead you will find repair costs, the things that raise a bid, and the points worth settling before you sign anything. Everything from diagnosis to hookup is under water heater service.
Is repair cheaper than buying a new heater?
This Old House puts repairs at $150 to $750. The spread comes from the fault. A bad thermostat, element, thermopile or gas valve is a smaller job than a failing tank, and once the tank itself starts leaking, no repair will save it.
We could not verify prices for individual parts such as the thermostat, thermopile, burner, element, valve or anode rod, so none are listed. Expect the written quote to itemize each.
Generally a tank that leaks has to be replaced, while one failed component on an otherwise sound heater leans toward a repair. To work out which you have, read the water heater leak page. One upkeep part is explained separately under anode rod replacement.
Is there a surcharge when the heater quits after hours?
Often, yes. In Bob Vila's description, out-of-hours work is charged between 1.5 and 3 times the usual rate, or adds a flat $100 to $350 beyond the hourly rate. According to This Old House, an emergency usually adds a flat fee and a higher hourly rate near $150.
When water is running over the floor, close the heater's supply, switch off its fuel or electricity, and after that open emergency water heater repair. A leak halted at the valve can often wait for morning, which sidesteps the surcharge.
What does a 30 or 40 gallon heater cost?
No verified price exists in our sources for any specific tank size, so there is no 30-gallon or 40-gallon number here. Bob Vila's $1,000 average describes tank heaters broadly, and we will not stretch it to one capacity. Any figure for those sizes has to come from a written quote for your own house.
Size changes what the unit itself costs. A smaller tank may or may not cope with your household, and the first-hour figure on its label settles that. Plenty of houses run 40 or 50 gallons, and your current heater's label is the sensible place to begin. A quick photo of it helps, because the plumber will want the model details.
Heaters bundled with furnaces, electric versus gas models, and indirect units tied to a boiler each price differently, so they are quoted from the house itself rather than from a chart.
What is the typical price of a full installation?
Two national references give two ranges. Bob Vila reports a typical job landing between $874 and $1,765, and This Old House shows $800 to $2,000 for installation in its price table. They overlap through the middle. The gaps at either end come from tank size, fuel type and the demands of the install.
Labor sits inside that total. This Old House lists hourly rates of $25 to $200, and Bob Vila gives $100 to $350 as a general span for a service call. Treat both as guides. Plenty of jobs come with one flat price instead.
Items that can lift an estimate:
- Changing the fuel, from gas to electric or the reverse, or relocating the heater.
- A new vent run, a larger gas line or electrical work.
- The permit fee and the time spent applying.
- Hauling away the old tank.
- Awkward access, such as a tight closet, a raised platform in the garage or an attic.
Is a permit required, and might California rules shift?
Expect to pull one. The Building and Safety page for San Bernardino says smaller work like replacing a heater is normally handed out at the counter. Redlands puts water heaters on its list of counter permits, paid in person. San Bernardino County files change-outs under plumbing permits. If you live in Highland or Yucaipa, call that city's building office to confirm, and ask the contractor early about the permit filing and its fee.
Regarding changes, the regional air board chose in June 2025 to leave Rules 1111 and 1121 as they are. No zero-NOx heater mandate follows from that vote.
About licensing, a contractor license is needed when a permit is required or when labor and materials come to $1,000. The CSLB website has a search for any license number.
What makes a tankless unit pricier?
Bob Vila gives about $1,000 as the average when one storage tank replaces another, and near $2,500 for a typical tankless unit. Neither comes with a range, so they stand only as averages. Our tank versus tankless comparison accounts for the gap. For the tankless half, tankless installation cost guide goes further.
A conversion may need a bigger gas pipe, a new vent or more electrical capacity. Expect every one of those to appear as its own charge on the estimate.
Common questions
How long does a typical storage tank last?
Department of Energy guidance, as quoted on third-party pages, puts storage tanks near 10 to 15 years. Mineral-heavy water may cut into that. San Bernardino Municipal Water Department's 2024 report shows average hardness of 242.67 mg/L, which makes scale a genuine worry for its customers.
What goes wrong with heaters most?
Typical complaints are no hot water, only warm water, drips from the tank or its fittings, and a rumble from sediment. Electric heaters often lose an element or thermostat, while gas ones often lose the pilot, the thermopile or the gas valve. A tank that leaks calls for replacement.
Which tank capacity suits my household?
Start by counting who showers or runs the dishwasher at the same time. A label's first-hour rating tells you how much hot water arrives in the busiest sixty minutes. Many households use 40 to 50 gallons, yet fixtures and habits should decide it, not a shortcut.
Is there a brand you would pick?
We rank none, because we hold no tested comparison. Ask which model the plumber would fit, the length of the manufacturer's warranty and what it covers. The installer's craft counts as much as the badge on the tank, and the estimate should describe the model and the work in detail.
What must the estimate include before I accept?
Ask for an itemized list covering the unit, venting, fittings, permit, disposal and any patching of walls or floors. Also request the exact model, its warranty and the contractor license number. For an estimate to compare, tell us about the current heater, its fuel and where it sits via the quote page.
Prices are one part of the job: the plumber guide for San Bernardino covers the rest.
References
- Bob Vila, water heater replacement cost, checked 2026-11-17
- This Old House, plumber cost guide, checked 2026-11-17
- Bob Vila, how much does a plumber cost, checked 2026-11-17
- City of San Bernardino Building and Safety Division
- City of Redlands Building and Safety Division
- San Bernardino County Land Use Services, plumbing permits
- California Contractors State License Board