Skip to the page
Call us (909) 768-7747

Guide ยท San Bernardino

Galvanized pipe replacement in older San Bernardino and Redlands homes

Galvanized steel supply pipe corrodes from the inside. Here is how to spot it, what replacing it involves, how long it takes and which permit rules apply.

Galvanized steel, copper and PEX pipe compared by joints and flexibility, with galvanized highlighted.

Zinc-coated steel carried water in countless houses before copper and plastic arrived. Over decades the zinc gives out, rust forms inside, and the opening narrows until a tap only trickles. The cure is replacing the affected lines, which is repiping. This guide supports our repiping service page; everything else we arrange begins at the home page.

Is the pipe in your walls galvanized?

Check whatever pipe is visible: garage, crawl space, the water heater closet. Galvanized runs dull gray with threaded joints. Scrape it lightly with a key and you see silver-gray, where copper turns orange-brown. A fridge magnet sticks to steel, while copper and plastic ignore it. Where no pipe shows, a plumber can identify it.

New faucets on old pipe are common, because owners swap fixtures and heaters without touching the lines in the walls. The washing machine box and the cabinet under the kitchen sink often reveal the pipe type with no cutting at all.

Age gives a hint. Take Del Rosa, ZIP 92404: Census figures give a median year built of 1963, including 5,936 homes from the 1950s. Redlands ZIP 92373 lists 1,372 homes built before 1940, and ZIP 92374 lists 1,057. Houses from those years are where galvanized lines are most likely, though many have been partly repiped over time.

Which symptoms say galvanized pipe is wearing out?

Rust-brown water after a tap sits idle, weak flow at several fixtures, flaking around threaded joints, and leaks surfacing in more than one spot all suggest corroding steel. Falling pressure is the classic sign, because rust closes the inside of the pipe while the outside still looks sound.

More clues: a tap that gushes for a second then fades, sluggish hot water at the farthest bathroom, a metallic taste. A plumber can cut out a short sample and show you the inside, which says more than looking at the outside.

Water chemistry plays a part. San Bernardino's city utility reports hardness averaging 242.67 mg/L for 2024, and scale can add to buildup in old pipe. If lead worries you, or you want the water tested, call the supplier printed on your bill and ask what testing it offers.

How is galvanized pipe replaced?

New lines, usually PEX or copper, run to each fixture and tie in at the shutoffs and the water heater. The old steel is pulled out or left dead inside the wall. Access holes are cut where needed and patched afterward. Partial replacement works, provided the transitions between metals use the right fittings.

Wall cross-section: old steel capped in place, a new line run beside it, and an access hole.

Replace everything, or only the worst runs? That is the usual decision. If one branch has failed but the rest still flows well, a section repair can buy time. Where pressure is poor throughout and leaks are repeating, a whole-house repipe usually costs less in the long run than patching again and again. For the materials themselves, see PEX versus copper.

Water heater connections need care. Dielectric fittings or the right transition pieces stop the steel-to-copper contact that can eat a joint. The quote should name the fittings.

How many days should a repipe take?

Whole-house repipes run to days, longer for large or multi-story homes. Our research found no verified local figure, so lean on the plumber's written estimate, which should give the number of shutoff days, say whether water returns each evening, and set out when patching and paint happen.

A partial job, such as one bathroom branch or the kitchen, may finish in a day. Access shapes the schedule more than square footage: an open attic is quick, while walls that are finished in tile or plaster take longer to open and patch. Waiting for an inspection can add a day or two.

Does repiping need a permit?

Usually, though the office covering your address has the final word. The county's plumbing page says plumbing work on an existing building needs a permit, and the City of San Bernardino takes single-family water re-pipe permits online. Redlands handles them in its Building and Safety Division. Highland and Yucaipa have separate offices.

Highland's city page does not settle the rule for us, so phone (909) 864-6861, ext. 232. Yucaipa's building office answers on (909) 797-2489. Contractor licensing is also a state matter: a permit job, or labor and materials from $1,000 up, requires the person doing it to hold a California contractor license. CSLB's lookup tool at cslb.ca.gov checks a number.

Settle who pulls the permit; the plumber normally does, with the inspection part of the job. Work done without one may complicate a sale or an insurance claim.

What about polybutylene pipe and replacement programs?

Polybutylene is a gray plastic water pipe used in some houses from an earlier building era, separate from galvanized steel but often found in the same repiping conversation. We could not verify a current replacement program that applies to San Bernardino or Redlands, so none is named here. If a plumber finds it, ask about replacement and check with your insurer.

What does swapping out galvanized pipe cost?

One national source, Bob Vila, lists a typical repipe from $1,500 to $15,000 with a $7,500 average (checked 2026-11-17). No local price backs it, so the quote in writing sets the price. Replacing part of the system costs less. Access, fixture count and material all move the total. Our repipe cost page goes through the drivers.

Common questions

How long until the water is back after galvanized replacement?

A whole house takes days; one branch might finish in a day. We have no verified local figure, so get the window in writing, along with the daily shutoff hours. The inspection and the wall patching afterward can stretch the schedule.

What belongs on a galvanized replacement quote?

The contractor license number, checkable on the state board's site. The pipe material and fittings, whether the permit and wall patching are included, the days without water, and the fate of the old pipe. Also who books inspections, since the work is not finished until an inspector has seen it, and what the written quote says about extra costs if walls reveal damage nobody could see beforehand.

Must an adult stay home during the pipe swap?

An adult should be present at the start to show where shutoffs and fixtures are, and reachable by phone as walls open up. Plenty of families leave during the noisiest days, but a trusted adult you can phone is the minimum. Clear the work areas before the plumber arrives.

References